OUR Specials

Floor Console Heat Pumps NZ: When They Beat a High Wall Unit (2026)

Floor console heat pump mounted low on a lounge wall in a Palmerston North home

Not every room in a Palmerston North home has a wall where a high wall unit does the job well. Two-storey homes with the living area upstairs, brick and block construction, villas with no clear external wall at the right height, the pipe run either gets expensive or the unit ends up mounted somewhere awkward. A floor console solves that without compromising on heat through a Manawatū winter. Here’s when one makes sense, when it doesn’t, and what it costs against a standard wall-mounted install.

Get in Touch

Request A free Quote Today!

Claim This Deal - Heat Pump Specials

Why We’re Fitting More Floor Consoles in Palmerston North

We’re quoting more floor consoles this year, mostly in older Palmerston North villas and bungalows being renovated rather than new builds. That’s not a style trend. Plenty of these homes were built long before heat pumps existed, and the wall that would normally take a high wall unit either doesn’t sit at the right height or is broken up by a window. Worth knowing early: if you qualify for EECA’s Warmer Kiwi Homes grant, it covers high wall units only, not floor consoles or ducted systems, so a floor console install is priced without that contribution.

What a Floor Console Heat Pump Is

A floor console runs the same reverse-cycle technology as the high wall units we install every week, just mounted low on the wall instead of up near the ceiling, similar in height and footprint to an old-style radiator. It heats and cools a room exactly the way our other air conditioning installs do, and comes in the same Daikin, Carrier, Mitsubishi Electric, Panasonic and Fujitsu options. The only real difference is where it sits and how the warm or cool air moves through the room.

Where a Floor Console Genuinely Wins

A floor console earns its place in a specific set of homes and rooms, not everywhere.

  • Villas and character homes where the only clear wall sits below window height or above a fireplace
  • Brick, block or double-brick construction, where a long high wall pipe run adds real cost
  • Rooms with floor-to-ceiling glazing or built-in furniture that rules out a high wall position
  • A high-stud lounge that never quite feels warm at floor level when the air blows down from the ceiling

Filter access is the other genuine win. A floor console’s filter sits at knee height instead of above a doorframe, so cleaning it every couple of months is a five-minute job without a stepladder, the same routine care we run through on our heat pump servicing visits.

Where a High Wall Unit Is Still the Better Buy

We’d rather steer you to the cheaper option than the bigger one, and for most Palmerston North homes that’s still a high wall unit. A floor console usually carries a higher price tag than a high wall unit of the same heating capacity, because the indoor unit is a different design and the install often needs custom trunking to route pipework down to floor level. It also takes up wall space at exactly the height furniture, curtains and pets tend to occupy, and a couch pushed in front of it chokes the airflow. If your room has a normal external wall at the right height, a high wall unit does the same job for less money and less floor-level clutter.

Floor Console vs High Wall: The Real Differences

Here’s how the two stack up on what matters when you’re choosing between them.

Factor Floor Console High Wall Unit
Typical position Low on the wall, radiator height Near the ceiling
Best suited to Villas, brick or block walls, no clear high wall spot A standard external wall in any modern home
Price vs same capacity Higher Lower, from $1,750
Filter access Knee height, easy Above the doorframe, needs a step
Wall or floor space used Takes wall space at furniture height Out of the way near the ceiling
Warmer Kiwi Homes eligible No Yes, high wall only

What It Costs and How the Install Differs

We don’t have a fixed floor console price to quote here, because the install differs more from home to home than a standard high wall job does. What we can tell you is that a comparable high wall unit starts from $1,750 including GST for a bedroom-sized system and $2,250 to $2,500 for a living area, and a floor console of the same capacity sits above that once you account for the unit and the extra trunking work. We measure the room, check the wall options, and give you a fixed installed price for both a floor console and a high wall unit where either is genuinely possible, so you can compare them side by side instead of guessing.

Floor Console Heat Pump FAQs

What Is a Floor Console Heat Pump?

A floor console is a reverse-cycle heat pump mounted low on the wall, similar in height to an old radiator, instead of up near the ceiling. It heats and cools a room the same way a high wall unit does, just from a different position in the room.

Are Floor Console Heat Pumps More Expensive Than High Wall Units?

Usually, yes, for the same heating capacity. The indoor unit is a different design and the install often needs extra trunking to bring pipework down to floor level, which adds to the price compared with a standard high wall install.

Do Floor Consoles Suit Villas and Older Homes?

Often, yes. A lot of Palmerston North villas and bungalows don’t have a wall at the right height for a high wall unit, so a floor console gives you the same heating and cooling without cutting into a wall that doesn’t suit it.

Does a Floor Console Qualify for the Warmer Kiwi Homes Grant?

No. The current EECA Warmer Kiwi Homes grant covers high wall units only, not floor consoles or ducted systems, so keep that in mind if you’re relying on the grant to bring the price down.

Can I Put Furniture in Front of a Floor Console?

Not directly in front of it. A floor console needs clear airflow in and out, so keep couches, curtains and cabinets a reasonable distance away, the same way you would with a high wall unit above a doorway.

Verdict on Floor Console Heat Pumps

A floor console is the right call in a specific situation: no usable wall at high wall height, a villa or brick home where the pipe run makes a high wall unit expensive to fit, or a room where you genuinely want warmth felt at floor level. Outside that situation, a high wall unit does the same job for less money, and we’ll say so plainly rather than quoting the pricier option because it happens to suit us better. If you’re not sure which one your room needs, our free site assessment settles it. We check the wall options, work out the right capacity the same way we cover in our heat pump sizing guide, and give you a fixed price for whichever system suits the room best.

Get in Touch