OUR Specials
Qualified Electricians & Air Conditioning Installers

Heat Pump Installation in Palmerston North

Sized right. Installed clean. Warm by tonight.

10+
Years Heating & Cooling Experience
$1,750
Installed Heat Pumps From
12/mo
Interest Free Plan With QCARD & GEM
5 - 10
Years Warranty Available
High Wall Heat PumpsFloor ConsolesMulti-Split SystemsDucted SystemsBack-to-Back InstallsNew Builds & Renovations
Call directly 022 519 5500 Send Messasge WhatsApp
Free Quote

Book your heat pump
installation quote

Reply within one working day, often the same morning.

Booking Form
Heat Pump Installation Specialists

Pump Installation Team

Palmerston North Heat Pumps is a dedicated installation team led by a qualified electrician and air conditioning specialist, and backed by the local trade experience of Budget Electrical. Every install is completed by qualified installers, with the electrical work done and certified by our own registered electricians – one team, one standard, on every job.

We install every type of residential heat pump: high wall units for bedrooms and living areas, floor consoles where wall space won’t work, multi-split systems running several rooms off one outdoor unit, and whole-home ducted systems. Brands we supply and install include Daikin, Carrier, Mitsubishi Electric, Fujitsu and Panasonic – across Palmerston North, Feilding, Ashhurst and the wider Manawatū.

From the free sizing assessment through supply, installation, electrical certification, commissioning and the servicing that follows, we manage the whole job start to finish. No subcontractor handovers. No guesswork on capacity. No missing Certificate of Compliance when you insure, rent out or sell the house.

Meet Your Installers
Palmerston North · High wall installation
Auckland · COLORSTEEL® re-roof

Specialist Heat Pump Installation

We install heat pumps the way the manufacturers intend them to be installed: capacity matched to the room with a proper heat-load check, pipework vacuum-tested and pressure-tested, refrigerant charge verified, and the whole system commissioned before we pack up. The goal is simple - a unit that performs to spec, a warranty that stays intact, and a wall that looks better than we found it.

No guesswork. No upselling. No shortcuts behind the wall.

Installation Type: Back-to-Back

Back-to-Back Heat Pump Installation

The most efficient install there is - and the price most Palmerston North homes pay, from $1,750 including GST

“Back-to-back” installation means your indoor unit sits on an external wall with the outdoor unit mounted directly behind it. The pipe run is short, the refrigerant does less work, nothing needs boxing in – it’s the tidiest, most efficient and most affordable way to install a heat pump, and most single-storey Palmerston North homes qualify.

Your installed price includes everything: the unit itself, mounting bracket, insulated pipework with tidy capping, the electrical connection completed by our own registered electricians with a Certificate of Compliance, a full vacuum and pressure test, commissioning, Wi-Fi setup where included – and we take every scrap of packaging with us.

A standard back-to-back installation takes three to four hours, and the unit is tested and heating before we leave. Bedroom-sized units run 1,750 – 2,000 installed, living-area units 2,250 – 2,500 including GST, with 12 months interest free available through Q Card and Gem Visa.

Which unit goes on that wall matters as much as the install. We size for Palmerston North conditions – frosty winter mornings, humid late summers – and match the brand to the job: Daikin and Mitsubishi Electric where quietness rules, Carrier where value and its 10-year warranty win, Fujitsu and Panasonic as proven all-rounders.

Get a Free Quote
Back-to-back heat pump install in Palmerston NorthBack-to-back install · Palmerston North
Installation Type: Non-Standard

Two-Storey, Internal Wall & Tricky Installs

No back wall to use? These are the installs other installers walk away from - we quote them properly instead

Plenty of Palmerston North homes don’t have a convenient external wall where the heat pump needs to go: two-storey homes with the living area upstairs, internal walls in open-plan layouts, brick and block construction, or character villas where visible pipework would ruin the room. None of these are a problem – they just need honest planning instead of a standard price.

We handle longer pipe runs with colour-matched trunking, condensate pumps where gravity drainage won’t work, and outdoor units positioned for airflow, frost drainage and your neighbour’s sleep. Where a high wall unit genuinely doesn’t suit, a floor console often solves it – same performance, mounted low like a radiator.

Every non-standard install starts with a free site assessment and ends with a fixed, itemised price before any work begins. And if the cheapest good answer is a different unit position than you had in mind, we’ll tell you that too – a shorter pipe run saves you money on the install and on every power bill after it.

Get a Free Quote
Double Storey Building Heat Pump Installation in Palmerston NorthNon-standard installs · Two-storey & internal walls
Installation Type: Replacement & Upgrades

Old Heat Pump Replacement

When your old unit struggles on frosty mornings, replacement is often cheaper than repair - here's how to tell

Heat pumps last 10 – 15 years. If yours is from that era, it’s likely running old-generation refrigerant, losing capacity exactly when Palmerston North mornings need it most, and using far more power than a modern inverter unit for the same warmth. Once a compressor or refrigerant fault appears in a unit that age, repair money is usually good money after bad.

We make replacement simple: the old unit is decommissioned, removed and disposed of properly, and a like-for-like back-to-back swap often lands close to standard install pricing because the wiring and pipe route already exist. Where the old electrical work isn’t up to current requirements, our electricians bring it up to standard and certify it – no second contractor needed.

Building new or renovating? Get us in at the framing stage. Planning the placement and pre-wiring with Budget Electrical before the linings go on means shorter pipe runs, hidden services and a cleaner finish than any retrofit can match.

Get a Free Quote
New Panasonic Heat Pump Installed as part of full reno in Palmerston NorthReplacement & upgrades · Palmerston North
Why Choose Us

Three commitments
behind every install.

Installing a heat pump is not a job for a generalist. The wrong installer will undersize the unit so it strains on -2° mornings, run sloppy pipework that slowly leaks refrigerant, or leave electrical work uncertified, problems that show up later as cold rooms, high power bills and declined warranty claims.

Our installation service is built around three commitments.

Registered ElectriciansQualified AC InstallersBacked by Budget Electrical5–10 Year Warranties
01

Qualified in both trades.

Heat pump installation is two trades in one job: refrigeration work and electrical work. Our team is qualified for both – installs completed by qualified installers, electrical connections done and certified by our own registered electricians, with a Certificate of Compliance issued on every job.

That paperwork protects your warranty, your insurance and your sale price later. We recommend asking any installer to show the same before you sign – it sorts the specialists from the van-and-a-ladder crowd quickly.

02

Sized and quoted properly.

Every quote starts with a heat-load check of your actual room – size, insulation, glazing, which way it faces – not a guess off the floor area. You get the capacity your home needs, from whichever brand suits the job, never whatever’s sitting in the van.

The price you approve is fixed and itemised: unit, installation, electrical and GST, line by line. No “while we’re here” extras on the invoice, and nothing vague to compare against other quotes.

03

Commissioned, warrantied, and we're still here.

No install is finished until it’s proven: vacuum and pressure tested, refrigerant charge verified, heating and cooling cycles run and checked before we leave. Then the warranty gets registered for you – up to 10 years on selected Carrier units, 5 years’ product and installation cover on Daikin.

And because we’re the local team that will also service the unit for years to come, we install like we’ll be seeing it again. If anything’s ever off, it’s one call and we come back.

Pricing · Palmerston North Guide Ranges

How Much Does Heat Pump Installation Cost In Palmerston North?

Most Palmerston North heat pump installations land inside these ranges - and unlike most "from" pricing, ours includes the unit, all standard installation work, the electrical certificate and GST. Back-to-back installs sit at the bottom of each range; complexity moves you up, never a surprise invoice.

The Range · Manawatū JobsInstalled prices · Including GST
Job TypeTypical Cost RangeTimeframe
Bedroom high wall heat pump, back-to-back (2.5 - 3.3 kW)$1,750 - $2,0003 - 4 hours
Living-area high wall heat pump, back-to-back (5.0 - 6.0 kW)$2,250 - $2,5003 - 4 hours
Two-room multi-split system (one outdoor unit)From $5,0001 day
Whole-home ducted system (6.0 - 12.5 kW)$6,500 - $9,5001 - 2 days
Non-standard installs (two-storey, internal wall) & commercialQuote per siteVaries
Guide ranges
These are guide ranges because wall construction, pipe run length, two-storey access, switchboard capacity and optional extras like zone control all affect the final figure. Whatever applies to your home is confirmed in a fixed, itemised quote before any work starts.
What's included
Every price includes the unit, mounting bracket, pipework and capping, electrical connection with Certificate of Compliance, commissioning and GST - itemised so you can compare quotes apples with apples.
This month's dealsSee our current installed heat pump specials.
See the specials
Heat Pump Installation Process

Eight steps.
One clean handover.

08STAGES · SIZED, INSTALLED & CERTIFIED
01

Free assessment

By phone or on-site. We look at the rooms you want heated, insulation, window area, wall construction and switchboard capacity – and listen to how you actually use the space before recommending anything.

02

Right-size & quote

A proper heat-load calculation decides the capacity, then you get a fixed, itemised installed price – unit, installation, electrical and GST. No “while we’re here” extras later.

03

Book your install

Most installs are booked within the week. We confirm the day before, turn up when we say we will, and one visit finishes the job for a standard install.

04

Clean installation

Drop sheets down, unit mounted level, insulated pipework capped tidy, wall penetrations sealed. The outdoor unit is positioned for airflow, frost drainage and your neighbour’s sleep.

05

Electrical & compliance

Our own registered electricians complete the wiring, a dedicated circuit where required – and issue your Certificate of Compliance. No second contractor, no scheduling gap.

06

Commissioning

The system is vacuum and pressure tested, refrigerant charge verified, then run through full heating and cooling cycles with output temperatures checked before we sign it off.

07

Walkthrough & Wi-Fi

Remote and phone app set up, filter-cleaning demo, and our honest advice on the cheapest way to run it through a Manawatū winter – steady and low beats blasting it.

08

Warranty & aftercare

We register your warranty, remind you when the annual service is due, and stay one local phone call away if anything ever needs attention.

Got questions?

Frequently Asked Questions About Heat Pump Installation

01

How much does it cost to install a heat pump in Palmerston North?

Installed prices start at $1,750 including GST for a bedroom-sized high wall unit on a back-to-back installation, 2,250 – 2,500 for living-area units, from $5,000 for a two-room multi-split and 6,500 – 9,500 for whole-home ducted systems. Those figures are the complete job – unit, installation, electrical work, Certificate of Compliance and GST.

Non-standard installs (two-storey homes, internal walls, long pipe runs) are quoted after a free site assessment, so the price you approve is the price you pay. See our current specials for exact models and installed prices.

02

How long does heat pump installation take?

A standard back-to-back installation takes three to four hours, and the unit is commissioned, tested and heating before we leave. Non-standard installs can take up to a full day, and whole-home ducted systems typically run one to two days. Either way, we install and certify everything in one visit – no waiting on a separate electrician.

03

What does "back-to-back installation" actually mean?

It means the indoor unit sits on an external wall with the outdoor unit mounted directly behind it, so the pipe run between them is as short as possible. It’s the most efficient and most affordable way to install a heat pump, and it’s the configuration our advertised prices are based on.

Most single-storey Palmerston North homes qualify. If your preferred wall doesn’t allow it, the free site assessment prices the alternative properly – no surprises on install day.

04

Do I need an electrician to install a heat pump?

Yes – a heat pump’s electrical connection must be completed and certified by a registered electrician, and you should receive a Certificate of Compliance for the work. With most installers that means coordinating a second trade. With us it’s built in: our own registered electricians do the wiring as part of the install, and the certificate is included with every job.

05

Can you install a heat pump on an internal wall or in a two-storey house?

Yes. Internal walls and upstairs living areas just need longer pipe runs in colour-matched trunking, sometimes a condensate pump, and more careful planning of where the outdoor unit lives. Where a high wall unit genuinely doesn’t suit, a floor console usually solves it. These installs are quoted fixed after a free site assessment – and if a different position would save you real money, we’ll say so.

06

Can you replace my old heat pump, and do you take the old one away?

Yes to both. We decommission and remove your old unit and dispose of it properly, and because the wiring and pipe route usually already exist, a like-for-like swap often lands close to standard install pricing. If your unit is 10 – 15 years old and struggling on frosty mornings, replacement usually beats repair – a modern inverter unit delivers the same warmth for considerably less power.